Extrude boss featured solidworks

Friday, March 25, 2016

When we create an extrude boss featured solidworks, we can determine the parameters for extrudes Boss with a lot of ways, To create an extrude feature: Create a sketch. Click one of the extrude tools: Extruded Boss/Base on the Features toolbar, or click Insert, Boss/Base, Extrude Extruded Cut on the Features toolbar, or click Insert, Cut, Extrude Extruded Surface on the Surfaces toolbar, or click Insert, Surface, Extrude Set the PropertyManager options. To extrude in both directions from the sketch plane, set the PropertyManager options in Direction 1 and Direction 2. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an Instant3D ruler appears so you can set precise values. Click .Blind. Extends the feature from the sketch plane for a specified distance. Through All. Extends the feature from the sketch plane through all existing geometry. Up To Next. Extends the feature from the sketch plane to the next surface that intercepts the entire profile. (The intercepting surface must be on the same part.)

Cut a solid body with a surface Solidworks

Thursday, March 17, 2016

To cut a solid body with a surface or plane: In the sample picture above model body surface and there is no sketch line. The first one we will use the technique with the cut surface. The steps are as follows, 1. Extrude the sketch boss to pass through his body surface. 2. Click OK 3. Insert -> Cut -> with surface 4. Select the surface that the color yellow, determine the direction cut, and OK. Right-click on the surface of the body select Hide Body Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. The Edit command might vary depending on the feature you select. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut. The arrow points in the direction of the solid to discard. With multibody parts, under Feature Scope, select one of the following: All bodies. The surface cuts all bodies every time the feature rebuilds. If you add new bodies to the model that precede the cut feature in the FeatureManager design tree and that are intersected by the cutting surface, these new bodies are also rebuilt to include the cut. Select bodies. The surface cuts only the bodies you select using the pointer. If you add new bodies to the model that are intersected by the cutting surface, right-click, select Edit Feature, and select those bodies to add them to the list of selected bodies. If you do not add the new bodies to the list of selected bodies, they remain intact. The solid bodies you select are highlighted in the graphics area, and listed under Feature Scope next to . Auto-select (Available with Selected bodies). Automatically selects all relevant intersecting bodies. Auto-select is faster than All bodies because it processes only the bodies on the initial list and does not rebuild the entire model.

Create a tapered shape Solidworks Blind

Tuesday, March 15, 2016

I have tried to create a tapered shape Solidworks. We make a circle first in the top plane. Click on the origin (0,0), then drag the mouse to form a circle. The next step after getting out of the sketch, click Insert, choose extruded, choose boss / base In the configuration extrude Direction 1 Choose the Blind, to determine the distance extrude input range Diameter 40 angle 45derajad Draft outward Do not tick Click OK. Tapering...Taper preview Tapered and Perpendicular Draft Steps Tapered and Perpendicular Draft Steps...Tapered steps applied Example of Flex Tapering2 The taper zone is limited by the position of the trim planes...To adjust the taper, move the pointer over a trim plane edge to display the Helix/Spiral PropertyManager Creates a tapered helix. (Available only for constant pitch helixes.) Select Taper Helix Parts and Features > Features Flex Overview and Options Tapering follows the direction of the triad's blue Z-axis...The trim planes do not move when you adjust the Taper factor Parts and Features EXTRUDE 2 Extrusion taper angle <0 .000000="" 2d="" 3d="" from="" moving="" to=""> 2D Emulator Neutral Plane Draft You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds Parts and Features  Features Mold Tools - Ruled Surfaces Replace non-drafted surfaces on imported models with drafted surfaces (using the Tapered or Sweep type...Ruled surface is tapered to the specified vector...With Tapered to Vector, Perpendicular to Vector, or Sweep Mold Design  Ruled Surfaces Standard Hole Size Tapered Drill Tapered are not supported for Legacy Hole types Design Checker Feature Checks Draft PropertyManager Tapered steps (Step Draft only...Creates the surfaces in the same manner as the tapered surfaces Parts and Features Features Parting Line with Step Draft Select Tapered steps if you want the surfaces to generate in the same manner as the tapered surfaces Parts and Features Features Mold Design Tools Overview tool to create surfaces that are either perpendicular or tapered away from selected edges Mold Design|SOLIDWORKS Fundamentals Industry-specific Design Tools|Mold Design Tools Overview Intersect planes are typically used to locate the starting or ending location of a tapered surface Counterbore Countersink Hole Straight Tap Tapered Tap Legacy Hole Holes created prior to the SolidWorks 2006 release Parts and Features Features Hole Wizard Overview Tapered Tap Parts and Features Features Tool and Die Design Tools Overview Deforms complex models in an intuitive manner by bending, twisting, tapering and stretching.

Solidworks tutorial Sketch smart dimension

Sunday, March 13, 2016

To use sketch smart dimension is very easy. We dimension 2D or 3D sketch entities with the Smart Dimension tool. We can drag or delete a dimension while the Smart Dimension tool is active. Dimension types are determined by the sketch entities you select. For some types of dimensions (point-to-point, angular, circular), the location where you place the dimension also affects the type of dimension that is added Start program SolidWorks and begin open a new part. Select the Front Plane and sketching. Make a sketch of the line consisting of four rows and three dimensions. Make sure the lower left corner of the sketch is the origin. Click on the Arc Tangent in the PropertyManager. Click on the right end of the horizontal line above. Place the tip of the arc at the tip end of a horizontal line above. Press the button to end the command line. Set the dimensions for the bow that we just created Click on the Smart dimension in-Command Manager. Create a dimension for each line of 60, 30, 20 Click on the arc. Set dimensions. Create an arc radius to 65. Click on OK. Creating a curved edge between the arc and the vertical line. Click on the Sketch Fillet CommandManager. Create a radius of 10 mm 'in the Property Manager-. Click on the bow, to the left of the vertical line. Click on the vertical line, just below the arc. Click on OK.

Design surface extend process Solidworks

Friday, March 11, 2016

In creating a design surface extend process, to create a different surface extend bodies with bodies initially is the first way described below is prepared in advance which of the surface did extend the surface, With the menu extend surface, we can extend the surface by selecting the edge, some edge, or face. To make the surface extends: Click the Extended surface on the toolbar or click Insert Surface, surface, Extend.in this case I use the following surface. The second is to please you perform the Offset Surface please enter the offset of 0 mm from the surface beginning then you already have two different surface bodies. Third please do hide bodies, in this case please hide bodies which would be the main bodies by right-clicking and then hide. After the hide one bodies the next step is please make the process extend to the bodies that are still visible today. With the above process, then you already have a new bodies are already extend surface. The fourth is to please you show that you hide bodies in the previous step, then please go to the feature Intersection Curve, after entering please and choose two bodies that have been created earlier. then OK. In the Property Manager: Under Edges / Faces to Extend, select one or more sides or face as desired. If we choose the edge, extending surface extends along the field edge. If we choose the face, extending surface extends along all sides of the face except those connected to the other face. we can make the surface extended to face tangent by clicking on the callout the which appears only if we choose the edge.

Sweep surface Solidworks

Saturday, March 5, 2016

To create a sweep surface: Create planes to sketch a sweep profile, sweep path, and if necessary, guide curves. Swept Surface To create a swept surface...Click Swept Surface (Surfaces toolbar) or Insert > Surface > Sweep Parts and Features > Features Sweep PropertyManager Sketch a profile and a path to follow, then click Swept Boss/Base (Features toolbar), Swept Cut (Features toolbar), or Swept Surface (Surfaces toolbar... Parts and Features > Features Creating a Sweep Swept Cut on the Features toolbar or Insert > Cut > Sweep...Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep Parts and Features > Features Sweep profile sketch and the path we created in planes. we also can sketch the sweep path in planes model or use the model edge for the path. Profile sketch by sketch path preview sweep If we use a guide curve, making coincident or using guide curves and profiles. Click Swept Surface on the Surfaces toolbar, or click Insert, Surface, Sweep. Set the Set the PropertyManager options. Click OK.